Satellite High Rise Roof User Manual

Browse online or download User Manual for TV Accessories Satellite High Rise Roof. Satellite High Rise Roof User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 2
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
P/N 20962 REVA 5-5-10
INSTRUCTIONS HIGH RISE UPPER ROOF/DOOR INSTALLATION
INTRODUCTION
Satellite portable restrooms and accessories must be assembled according to approved assembly procedures.
Variations in assembly could adversely affect product life and warranty.
HARDWARE:
TOOLS: *DRILL ELEC/CORDLESS, * #10 (3/16") DRILL BIT, *RIVET GUN
1. Fasten Upper Door Assy to Lower Door:
Align parts as shown. With hinge up against lip on lower door, align columns of upper door and lower door.
Rivet Upper Door Assy to Lower Door using Rivet #17436. Transfer drill through end hole in hinge using a #10
(3/16”) drill bit. Fasten with rivet gun. Repeat on remaining holes in hinge.
2. Fasten Swivels:
Drill out dimples (4) in recessed area in door. BE CAREFUL TO DRILL THROUGH FIRST LAYER ONLY. Fasten
swivel to door using Rivet #17436. Repeat on other swivel.
3. Fasten # 20887 Hinge: See fig A.
Using Rivets #11027 and #11315 Washers rivet hinge to back angle in pre-drilled holes.
Rivets through hinge and into angle with a backup Washer. Set rivets with rivet gun.
4. Fasten #20825 Plates: See fig B.
Using Rivets #11027 rivet # 20825 Plate to inside Roof use pre-drilled holes in Roof.
Rivets through Plate and into Roof with a backup Washer on the outside of Roof. Set rivets with rivet gun.
Repeat on other side.
5. Fasten Roof to Hinge: See fig C.
Using Rivets #11027 and #11315 Washers rivet Hinge to Roof in pre-drilled holes.
Rivets through Roof and into Hinge with a backup Washer. Set rivets with rivet gun.
6. Slide #20826 Brackets Through #20825 Plates. See Fig. D
7. Fasten #20826 Brackets to Angles: See fig E.
Using Rivets #11027 and #11315 Washers rivet Bracket in pre-drilled holes in angle.
Rivets through Bracket and into Angle with a backup Washer. Set rivets with rivet gun.
8. Fasten #20826 Brackets to Side Panels: See fig F.
Using Rivets #11027 and #11315 Washers rivet Bracket to side Panels. Transfer drill through holes in bracket,
through side panel.
Rivets through Bracket and into side panel with a backup Washers. Set rivets with rivet gun.
Page view 0
1 2

Summary of Contents

Page 1 -

P/N 20962 REVA

Page 2

P/N 20962 Rev A

Comments to this Manuals

No comments