
FREEDOM 2 PORTABLE RESTROOM ASSEMBLY INSTRUCTION 2530 Xenium Lane North, Minneapolis, MN 55441 Telephone: 763-553-1900 Fax: 763-553-1905 800-328
PARTS LIST PN 14579/REV, X page 2
INTRODUCTION Satellite portable restrooms must be assembled according to approved assembly procedures. Avoid variations in assembly procedures whic
2. DRILL DIMPLES ON EACH OF THE THREE SIDE PANELS. Using a ¼” bit d
5. ATTACH FRONT ASSEMBLY Using #68 aluminum large flange rivets and back-up washer attach the front to the panels through the 5th hole from the botto
9. ATTACH ROOF TO SIDE PANELS Drill all dimples on roof (24). Rivet the roof to the panel at the two center locations on each panel
12. INSTALL LARGE FREEDOM2 TANK. 13. INSTALL TOILET SEAT. 14. INSTALL VENT SCREENS. Drill thru the panel using a ¼” drill bit. PN 14579/REV,
15. INSTALL HANDRAILS. 16. INSTALL HANDLE AND DECAL 17. INSTALL DOOR LATCH PN 14579/REV, X
18. INSTALL DOOR CLOSURE 19. OPTIONAL DOOR SWEEP.
Comments to this Manuals