MAXIM 3000™ PORTABLE RESTROOM ASSEMBLY INSTRUCTIONS 2530 Xenium Lane North, Minneapolis, MN 55441 Telephone: 763-553-1900 Fax: 763-553-1905
Parts List PN 17674/REV H
INTRODUCTION Satellite portable restrooms must be assembled according to approved assembly procedures. Avoid variations in assembly procedures which
Seat lid assembly. If installing the Turbo Flush, do so before continuing with the restroom assembly. Position the tank in the base as sh
Finish installing the right/left panels. Push panel firmly against the base with foot and install (1) screw PN 13860 vertically into the dimple (for
Install the urinal. Drill dimple with #10 drill bit Place the drain tube of the urinal into the hole in the tank Insert rivet into the urinal and p
Start door assembly. Drill the (2) dimples near the latch using a #10 (0.194”) drill bit. (if not already drilled) Rivet the door handle to the door
Install the Door. Insert the door tube into the short bushing installed in the base. Bottom spring will sit on base. (Make sure black washer is on d
Comments to this Manuals