Satellite Freedom User Manual download pdf (Page 10)

PN 21337 REV B - 10 - 3-16-12

Install Paper guard: Install Lift Handles:

36) Install paperguard PN 17082 and

washer PN 11315 on the inside. Insert

the spindle PN 16844 into the

paperguard. Note the position of the

hook.

37) Locate 6 dimples in each side panel

(left & right) for rear lift handles. Drill 1/4"

(0.25) [6.35mm] holes through panels.

Locate 6 dimples in each facing (left &

right) for front lift handles. Drill 1/4"

(0.25) [6.35mm] holes through panels.

38) Rivet handles PN 14611 to panels /

facings using rivets PN 11270 through

handle holes and into panels / facings.

Install washer PN 11361 and washer PN

11315 on the rivet from the inside of

panels / facings.

Install Roof:

39) Place roof PN 21269 on unit. Insert

vent pipe in through roof. Align holes in

roof with holes in sides & rear panel.

Rivet roof to the sides & rear panels

using rivets (15) P/N 11054 installed

from outside of roof and washers (15)

P/N 11315 inside on panel.

40) Rivet roof to front facings. First

place block of wood under bottom of

door approximately 3.00” in height

(right side). Pull roof down transfer

drilling through 3 holes in left & right side

of roof into front facings. Rivet roof to

facings using rivets (6) P/N 11054

installed from outside of roof and

washers (6) P/N 11315 inside on panel.

41) Rivet roof to front top facing. Pull roof

down transfer drill through holes in roof

(do not drill through 2

nd

wall of front

top facing) using #10 (.193”)

[5 mm] Drill bit. Rivet roof to front top

facing with (4) rivets PN 14427

Front / facing

handles

Rear handles

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments