Satellite Freedom User Manual download pdf (Page 3)

PN 21337 REV B - 3 - 3-16-12

INTRODUCTION

Satellite portable restrooms must be assembled according to approved assembly procedures. Avoid variations in assembly

procedures which could adversely affect product life and warranty.

All references to front, left, right, and rear are looking

at the door of the unit from the outside.

Tools:

●Standard screwdriver

•Drill Electric or Cordless Drill •# 2 Phillips Head Driver Bit •3/8" (.375”)[9.53 mm] Hex

Driver bit

●Pop Rivet Gun ●#10 (.193” ) [ 5 mm ] Drill bit ●1/4” (.250”) [ 6 mm ] Drill bit ●T-30 Torx bit

•3/8" (.375”) [9.53 mm]

Open end wrench

●1/2” (.500”) [12.2 mm] Open

end wrench

●21/64” (.328”) [8.3 mm] drill bit

HELPFUL HINTS:

• Keep panels out of direct sunlight.

• Don’t open up all of your kit boxes. Open up only enough kit boxes to assemble the number of toilets you are

currently working on. KEEP PARTS ORGANIZED

• Staging parts will minimize assembly time.

• Keep driver as upright as possible when driving lag screws for panel to tank attachment.

FRONT

LEFT RIGHT

1 2 3 4 5 6 7 8 ... 11 12

No comments

Satellite Freedom User Manual Page 3